MOT Status
ExpiredMileage
97,689 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust has a major leak of exhaust gases centre pipe (6.1.2 (a))
Nearside Brake pipe excessively corroded to brake comp (1.1.11 (c))
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Brake load sensing valve stiff (1.1.17 (c) (i))
Rear Brake pipe slightly corroded (3.6.B.2c)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Rear Brake pipe slightly corroded (3.6.B.2c)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Brake load sensing valve linkage stiff (3.6.E.3)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside rear brake binding (3.7.B.1)
Rear Brake load sensing valve linkage seized (3.6.E.3)
Rear Exhaust system not adequately supported (7.1.1)
Offside front wiper blade worn
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Side repeater incorrect colour (1.4.A.2f)
Nearside front brake binding (3.7.B.1)
Offside Front position lamp(s) not working (1.1.A.3b)
Rear Brake load sensing valve linkage seized (3.6.E.3)
Exhaust has a minor leak of exhaust gases (7.1.2)
Items removed from driver's view prior to test
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Brake load sensing valve linkage seized (3.6.E.3)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Exhaust has a minor leak of exhaust gases (7.1.2)
Brake load sensing valve linkage seized (3.6.E.3)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Headlamp aim too low (1.8)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Headlamp aim too low (1.8)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Headlamp aim too high (1.8)
Rear Brake load sensing valve linkage seized (3.6.E.3)
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BF03 HDX is a 2003 Peugeot 206 in Green with a 1,124cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 63.6%.
Across all 2003 Peugeot 206 models, the average MOT pass rate is 68.8% with a typical mileage of 62,409 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BF03 HDX, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 23 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BF03 HDX?
You can check the full history of BF03 HDX by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BF03 HDX registered?
BF03 HDX is a 2003 Peugeot 206, first registered on 1 March 2003.
Is BF03 HDX safe to buy?
The MOT history for BF03 HDX shows 22 tests with a 63.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BF03 HDX have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BF03 HDX. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.