MOT Status
ExpiredMileage
104,765 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Oil leak
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Front All position lamps not working (1.1.A.3b)
Nearside Front Headlamp not working on main beam (1.7.5a)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Oil leak
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Offside Front All position lamps not working (1.1.A.3b)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Tyre has ply or cords exposed (4.1.D.1b)
Offside Rear Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)
Offside Stop lamp excessively damaged so that it is not visible from a reasonable distance (1.2.1d)
Rear Brake load sensing valve linkage stiff (3.6.E.3)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Registration plate lamp not working (1.1.5c)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Rear Brake load sensing valve linkage stiff (3.6.E.3)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Front brake discs in poor condition.
Nearside Outer Front Brake pad(s) wearing thin (3.5.1g)
Offside Outer Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Front Bonded suspension unit bonding failed and part of unit is likely to become displaced (2.4.F.2)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BF03 PNZ is a 2003 Peugeot 206 in Blue with a 1,124cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 62.5%.
Across all 2003 Peugeot 206 models, the average MOT pass rate is 68.8% with a typical mileage of 62,409 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BF03 PNZ, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 23 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BF03 PNZ?
You can check the full history of BF03 PNZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BF03 PNZ registered?
BF03 PNZ is a 2003 Peugeot 206, first registered on 1 March 2003.
Is BF03 PNZ safe to buy?
The MOT history for BF03 PNZ shows 16 tests with a 62.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BF03 PNZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BF03 PNZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.