2003 Peugeot 206

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Nearside Front Road wheel bead rim badly distorted (4.2.A.1a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear rear brake binding (3.7.B.1)

Nearside Rear wheel bearing has excessive play (2.6.2)

Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Brake load sensing valve linkage seized (3.6.E.3)

Offside Side repeater incorrect colour (1.4.A.2f)

Offside Stop lamp not working (1.2.1b)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front coil spring broken (2.4.C.1a) DANGEROUS

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Outer Rear Suspension component mounting prescribed area is distorted but not considered excessive (2.4.A.3)

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside rear brake fluctuating, but not excessively (3.7.B.3)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Tow ball/hitch not fitted at time of test

damage on offside pannels

dampness around rear offside load brake valve no leaks at time of test.

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Outer Rear Suspension component mounting prescribed area is distorted but not considered excessive (2.4.A.3)

Offside Front Side repeater slightly discoloured (1.4.A.2f)

Offside Front constant velocity joint is slightly worn (2.5.C.1b)

Offside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Tow ball/hitch not fitted at time of test

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Rear Brake load sensing valve linkage seized (3.6.E.3)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Outer Rear Suspension component mounting prescribed area is distorted but not considered excessive (2.4.A.3)

Offside Front Side repeater slightly discoloured (1.4.A.2f)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front constant velocity joint is slightly worn (2.5.C.1b)

Offside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Tow ball/hitch not fitted at time of test

tempary door mirror fitted offside front

Nearside Rear Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Centre Front Parking brake lever has little reserve travel (3.1.6b)

Centre Front Parking brake lever has little reserve travel (3.1.6b)

Nearside Front Headlamp aim too low (1.8)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front All position lamps not working (1.1.A.3b)

Offside Front Headlamp aim too high (1.8)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front Headlamp aim too high (1.8)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Steering system lightly rubbing (2.2.D.2a)

Front Steering system slightly rough (2.2.D.1)

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Exhaust system not adequately supported (7.1.1)

Rear registration plate delaminated (6.3.1d)