2003 Peugeot 206

lower rear engine mount bush slightly deteriated

n/s/f inner pads slightly low

Brake load sensing valve linkage defective and function impaired seized linkage arm (1.1.17 (a))

Headlamp aim too low o/s/f dip (4.1.2 (a))

Position lamp not working n/s/r sidelight (4.2.1 (a))

Rear fog lamp not working rear center fog (4.5.1 (a) (ii))

Suspension arm ball joint dust cover no longer prevents the ingress of dirt o/s/f bottom b/joint cover split (5.3.4 (b) (ii))

Shock absorbers likely to become detached n/s/r shock bottom bush detached (5.3.2 (a) (ii)) DANGEROUS

Spare wheel likely to become detached spare wheel insecure (6.1.5 (b) (ii)) DANGEROUS

lower rear engine mount bush slightly deteriated

n/s/f inner pads slightly low

Nearside Rear Lower Shock absorber has a slightly worn bush (2.7.4)

Offside Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Exhaust back box corroded outer layer

Offside Front Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Passengers airbag turned off

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Exhaust back box corroded outer layer

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Passengers airbag turned off

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Offside Rear Brake load sensing valve linkage stiff (3.6.E.3)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Rear Registration plate lamp not working (1.1.C.1d)

Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Offside Rear Brake load sensing valve linkage stiff (3.6.E.3)

Near side front tyre wearing on outer and inner edge

Nearside Front Lower Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Child seat fitted not allowing full inspection of adult belt

Engine covers fitted obscuring some components in the engine bay

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Inner Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Under-trays fitted obscuring some underside components

child seat fitted to n/s/r seat

Brake load sensing valve seized (3.6.E.3)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Nearside Headlamp aim too far to the left (1.8)

Offside Headlamp not working on dipped beam (1.7.5a)

Child seat fitted not allowing full inspection of adult belt

Engine covers fitted obscuring some components in the engine bay

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Inner Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Under-trays fitted obscuring some underside components

child seat fitted to n/s/r seat

Rear Brake has a slight discharge of oil (3.6.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Nearside Headlamp aim too low (1.8)

Front Brake pad(s) wearing thin (3.5.1g)

Front registration plate character(s) incorrectly spaced (6.3.4a)

Rear registration plate character(s) incorrectly spaced (6.3.4a)

Offside Front Front suspension has excessive movement at a wishbone pin or bush (2.5.A.1c)

Rear Brake load sensing valve linkage seized (3.6.E.3)

front brake application uneven (3.7.B.2)