2003 Peugeot 206

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Rear Brake valve leaking load compensator (1.1.7 (d) (i))

Engine management light on.

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Horn not working (7.7 (a) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Front Brake pipe corroded, covered in grease or other material osf/nsf ferrules (1.1.11 (c))

Rear Brake pipe corroded, covered in grease or other material osr/nsr ferrules (1.1.11 (c))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Headlamp aim too high (1.8)

Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Suspension arm rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Headlamp aim too high and too far to the left. (1.8)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Suspension arm synthetic bush deteriorated resulting in excessive movement (2.4.G.2)

petrol tank strap corroded.

Nearside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

petrol tank strap corroded.

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

rear brake application uneven (3.7.B.2)

rear brakes release unevenly (3.7.B.4)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brake load sensing valve linkage stiff (3.6.E.3)

Rear Brake load sensing valve linkage seized (3.6.E.3)

rear brake application uneven (3.7.B.2)

rear brakes release unevenly (3.7.B.4)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

slight marking on windscreen

fuel tank strap rusty.

Nearside Front Headlamp aim not tested (1.8.A.1c)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Offside Rear Brake load sensing valve linkage seized (3.6.E.3)

Front Bonded suspension unit deteriorated but can function as intended (2.4.F.3)

Front Brake pad(s) wearing thin (3.5.1g)