MOT Status
ExpiredMileage
130,656 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
rear arches corroded
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Rear Registration plate lamp not working (1.1.C.1d)
Registration plate lamp not working (1.1.C.1d)
Windscreen washer provides insufficient washer liquid (8.2.3)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
rear arches corroded
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Stop lamp not working (1.2.1b)
n s r wheel arch corroded
o s r wheel arch corroded
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Registration plate lamp not working (1.1.C.1d)
Advise offside washer jet
Both front brake disc corroded inner edge
Front Body has slight corrosion (6.1.B.2)
Rear Body has slight corrosion (6.1.B.2)
Under-trays fitted obscuring some underside components
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Offside Rear Anti-roll bar linkage insecure (2.4.G.1)
Advise offside washer jet
Both front brake disc corroded inner edge
Front Body has slight corrosion (6.1.B.2)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1b)
Rear Body has slight corrosion (6.1.B.2)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1a)
Under-trays fitted obscuring some underside components
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Parking brake: efficiency below requirements (3.7.C.1b)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Offside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Vehicle structure has slight corrosion (6.1.B.2)
Suspension joint nearside lower dust cover split/missing
Suspension joint offside lower dust cover split/missing
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
rear brake pads on limit
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BF03 XZX is a 2003 Mazda 6 in Silver with a 2,261cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 52.9%.
Across all 2003 Mazda 6 models, the average MOT pass rate is 71.6% with a typical mileage of 83,392 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying BF03 XZX, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 23 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BF03 XZX?
You can check the full history of BF03 XZX by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BF03 XZX registered?
BF03 XZX is a 2003 Mazda 6, first registered on 7 March 2003.
Is BF03 XZX safe to buy?
The MOT history for BF03 XZX shows 17 tests with a 52.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BF03 XZX have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BF03 XZX. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.