2004 Honda CBF600

Front Tyre worn close to the legal limit uneven wear (5.2.3 (e))

Exhaust noisy (8.1.1 (a))

Motorcycle structure is modified but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

Brake lever has insufficient reserve travel (1.1.2 (a))

Front Brake lever has insufficient reserve travel (1.1.2 (a))

Steering headbearing has slight free play (2.2.2 (f) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Drive chain slightly tight (6.2.1d)

Steering headbearing has slight free play (2.2.2)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Headlamp aim too low (1.6)

Rear wheel bearings have excessive free play (2.4.A.2c)

Front Tyre has a lump caused by separation or partial failure of its structure (4.1.2a(ii)) DANGEROUS

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Steering headbearing has slight free play (2.2.2)

Drive chain slightly loose (6.2.1d)

Front Brake disc(s) slightly pitted (3.2.A1l)

Brake disc(s) slightly pitted (3.2.A1l)

Steering headbearing has slight free play (2.2.2)

Drive chain excessively loose (6.2.1d)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Brake disc(s) slightly pitted (3.2.A1l)

Steering headbearing has slight free play (2.2.2)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h) DANGEROUS

Drive chain excessively loose (6.2.1d)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))