MOT Status
ExpiredMileage
55,996 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill panel (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive nearside and offside outer sill panel (5.3.6 (a) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Road wheel badly distorted inner rim (5.2.2 (c) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill panel (5.3.6 (a) (i))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill panel (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill panel by rear beam mount (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill panel (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive nearside and offside outer sill panel (5.3.6 (a) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive inner sill panel (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive outer sill panel (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)
Offside Front Tyre worn close to the legal limit inner edge (4.1.E.1)
centre section of exhaust corroded / deteriorated
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Subframe mounting prescribed area is excessively corroded inner sill panel (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive inner sill panel (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive outer sill panel (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)
Offside Front Tyre worn close to the legal limit inner edge (4.1.E.1)
centre section of exhaust corroded / deteriorated
Corrosion down both inner sills
EML on
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement Rear bush (2.4.G.2)
Front brake disc in such a condition that it is seriously weakened Inner edge excessively pitted only brake on 10% - 20% of surface (3.5.1i)
Nearside Rear Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Corrosion down both inner sills
EML on
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement Rear bush (2.4.G.2)
Offside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
front brake discs corroded
Nearside Front passenger door cannot be opened from outside the vehicle (6.2.B.1b)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
both rear tyres cracked and perrished
nearside front tyre getting low
Front Windscreen wiper not operating automatically when switched on (8.2.1b)
Rear fog lamp not working (1.3.2b)
both rear tyres slight deterioration
speedo no display
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
o/s/f & both rear tyres approaching limit
Brake hydraulic reservoir fluid level below minimum level (3.6.G.1b)
Nearside Front Road wheel bead rim badly distorted (4.2.A.1a)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front Brake pad(s) wearing thin (3.5.1g)
front brake discs very worn
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BF06 DMV is a 2006 Ford Ka in Blue with a 1,299cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 63.2%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BF06 DMV, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BF06 DMV?
You can check the full history of BF06 DMV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BF06 DMV registered?
BF06 DMV is a 2006 Ford Ka, first registered on 31 March 2006.
Is BF06 DMV safe to buy?
The MOT history for BF06 DMV shows 19 tests with a 63.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BF06 DMV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BF06 DMV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.