MOT Status
ExpiredMileage
88,078 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Road wheel fixing missing (5.2.1 (a) (i))
Nearside Rear Parking brake inoperative on one side (1.4.1 (a))
Offside Front Headlamp aim too high (4.1.2 (a))
Offside Rear Hydraulic brake cylinder leaking hydraulic fluid (1.1.16 (b) (i))
Offside Rear Service brake lagging in operation (1.2.1 (d))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Parking brake inoperative on one side (1.4.1 (a))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened both front discs inner sides (1.1.14 (a) (ii))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Supplementary restraint system warning lamp does not illuminate (7.1.6 (a))
Headlamp levelling device inoperative (4.1.5 (a))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Parking brake inoperative on one side (1.4.1 (a))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Supplementary restraint system warning lamp does not illuminate (7.1.6 (a))
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Parking brake inoperative on one side (1.4.1 (a))
Offside Front Position lamp not working (4.2.1 (a))
Offside Parking brake inoperative on one side (1.4.1 (a))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Fuel system component leaking excessively or a risk of fire (6.1.3 (b) (ii)) DANGEROUS
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Engine covers fitted obscuring some components in the engine bay
Play in steering rack inner joint(s)
Under-trays fitted obscuring some underside components
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Windscreen wiper blade insecure (8.2.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Windscreen wiper blade insecure (8.2.2)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Engine covers fitted obscuring some components in the engine bay
Play in steering rack inner joint(s)
Under-trays fitted obscuring some underside components
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside rear brake binding (3.7.B.1)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
front discs heavily corroded on inner edges //nsf tyre wearing on inner edges
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2) DANGEROUS
front discs heavily corroded on inner edges //nsf tyre wearing on inner edges
Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Peugeot 1007?
Based on 124,460 MOT tests across 7,897 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BF06 PLU is a 2006 Peugeot 1007 in Red with a 1,398cc diesel engine. This vehicle has been through 20 MOT tests with a personal pass rate of 60%.
Across all 2006 Peugeot 1007 models, the average MOT pass rate is 73.5% with a typical mileage of 45,010 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 1007 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 4,020 recorded failures. If you're considering buying BF06 PLU, it's worth having these areas checked by a mechanic before committing.
The Peugeot 1007 typically stays on UK roads for around 21 years. At 20 years old, this Peugeot 1007 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BF06 PLU?
You can check the full history of BF06 PLU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BF06 PLU registered?
BF06 PLU is a 2006 Peugeot 1007, first registered on 1 March 2006.
Is BF06 PLU safe to buy?
The MOT history for BF06 PLU shows 20 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BF06 PLU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BF06 PLU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.