MOT Status
ValidMileage
132,351 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Headlamp has a product on the lens but not seriously reducing light output Both Sides (4.1.4 (b))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Coil spring corroded Both Sides (5.3.1 (b) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced Axle (6.1.1 (c) (i))
Undertray Fitted
Front Headlamp has a product on the lens but not seriously reducing light output Both Sides (4.1.4 (b))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Coil spring corroded Both Sides (5.3.1 (b) (i))
Rear Registration plate lamp inoperative in the case of a single lamp or all lamps Both Sides (4.7.1 (b) (ii))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced Axle (6.1.1 (c) (i))
Undertray Fitted
Exhaust emits black smoke during acceleration (8.2.1.2 (g))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Inner Integral body structure is fractured and structural rigidity is significantly reduced Sill corroded and has a hole. (6.1.1 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Lower Suspension arm ball joint likely to become detached Marked with chalk. (5.3.4 (a) (ii)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm 205-55-16 (5.2.3 (e)) DANGEROUS
Offside Rear Tyre has a lump, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Exhaust emits black smoke during acceleration (8.2.1.2 (g))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Exhaust has a minor leak of exhaust gases central (6.1.2 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))
Exhaust has a minor leak of exhaust gases central (6.1.2 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Fuel hose deteriorated (6.1.3 (c) (ii))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Fuel hose deteriorated (6.1.3 (c) (ii))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement lower arm (5.3.4 (a) (i))
Offside Front Tyre slightly damaged/cracking or perishing perrishing (5.2.3 (d) (ii))
Offside Rear Suspension rod ball joint has slight play drop link (5.3.4 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Suspension component corroded but not seriously weakened rear sususpention unit (5.3.3 (b) (i))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Headlamp light intensity severely reduced possible bulb incorrectly fitted (4.1.4 (a))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Headlamp light intensity severely reduced possibley bulb incorrectly fitted (4.1.4 (a))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement lower arm (5.3.4 (a) (i))
Offside Front Tyre slightly damaged/cracking or perishing perrishing (5.2.3 (d) (ii))
Offside Rear Suspension rod ball joint has slight play drop link (5.3.4 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Suspension component corroded but not seriously weakened rear sususpention unit (5.3.3 (b) (i))
Front Inner Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Offside Rear Trailing arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Rear Trailing arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BF08 AKO is a 2008 Mazda 3 in Blue with a 1,598cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 72.7%.
Across all 2008 Mazda 3 models, the average MOT pass rate is 73.8% with a typical mileage of 66,871 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying BF08 AKO, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 18 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BF08 AKO?
You can check the full history of BF08 AKO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BF08 AKO registered?
BF08 AKO is a 2008 Mazda 3, first registered on 7 March 2008.
Is BF08 AKO safe to buy?
The MOT history for BF08 AKO shows 22 tests with a 72.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BF08 AKO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BF08 AKO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.