MOT Status
ExpiredMileage
75,915 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sills next rear axle bush (6.2.2 (d) (i))
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Lower Suspension arm pin or bush excessively worn Rear (5.3.4 (a) (i))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Lower Suspension arm pin or bush excessively worn Rear (5.3.4 (a) (i))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Items removed from driver's view prior to test ()
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Inner sill (6.2.2 (d) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
nearside and offside rear coil springs slightly corroded
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Lower Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Road wheel fixing missing (5.2.1 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Lower Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
nearside and offside front tyres worn low on inner edges of tread
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength body/inner wheel arch (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Front Coil spring fractured or broken (5.3.1 (b) (i))
Front tyres wearing on inside edges
Nearside rear body damaged and corroded
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill/inner arch (5.3.6 (a) (i))
Exhaust has a minor leak of exhaust gases (7.1.2)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Both front tyres bald on shoulders
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Rear Exhaust has a minor leak of exhaust gases joint (7.1.2)
Both front tyres bald on shoulders
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Rear Exhaust has a minor leak of exhaust gases joint (7.1.2)
Rear fog lamp switch faulty stuck in on position (1.3.1a)
Both front tyres wearing low on shoulders.
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Rear Exhaust has a minor leak of exhaust gases Joint (7.1.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear position lamp(s) not working (1.1.A.3b)
Both rear tyres tread cracked
Front registration plate delaminated but not likely to be misread (6.3.1d)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Windscreen wiper blade insecure (8.2.2)
Nearside Rear Stop lamp not working (1.2.1b)
Both rear tyres tread cracked
Front registration plate delaminated but not likely to be misread (6.3.1d)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Outer Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
both rear tyre treads cracking.
wipers poor.steering pipes corroded.
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BF08 VZP is a 2008 Ford Ka in Grey with a 1,299cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 60.9%.
Across all 2008 Ford Ka models, the average MOT pass rate is 71.0% with a typical mileage of 41,756 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BF08 VZP, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 18 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BF08 VZP?
You can check the full history of BF08 VZP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BF08 VZP registered?
BF08 VZP is a 2008 Ford Ka, first registered on 3 March 2008.
Is BF08 VZP safe to buy?
The MOT history for BF08 VZP shows 23 tests with a 60.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BF08 VZP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BF08 VZP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.