MOT Status
ExpiredMileage
98,206 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Brake hose excessively twisted (1.1.12 (b) (ii))
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill marked in yellow chalk (6.1.1 (c) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill marked in yellow chalk x2 holes (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill marked in yellow chalk (5.3.6 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Coil spring corroded Both rears (5.3.1 (b) (i))
Exhaust mounting defective Rear hanger broken but still supported (6.1.2 (a))
Heatshield insecure
Items removed from driver's view prior to test ()
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced Outer sill (6.1.1 (c) (i))
Nearside Front Tyre worn close to legal limit/worn on edge on 2mm and worn on outer edge (5.2.3 (e))
Nearside Rear Nail in tyre ()
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge on 3mm and slightly worn on both edges (5.2.3 (e))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced Next to drivers door (6.1.1 (c) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced Outer sill (6.1.1 (c) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (i))
Service brake fluctuating, but not excessively Both fronts (1.2.1 (e))
Vehicle underside corroded
Spare wheels hanger corroded
Central Exhaust system not adequately supported hanger broken (7.1.1)
Front Brakes imbalanced across an axle 38% (3.7.B.5b)
Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Exhaust system not adequately supported hanger broken (7.1.1)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Spare wheels hanger corroded
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Lower Ball joint has excessive play (2.2.B.1f)
Nearside Rear Trailing arm has excessive play in a pin/bush axle bush (2.4.G.2)
Offside Rear Trailing arm has excessive play in a pin/bush axle bush (2.4.G.2)
Rear Registration plate lamp not working (1.1.C.1d)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Brake fluid warning lamp illuminated (3.6.G.2)
Fuel system component leaking (7.2.3)
Nearside Front Headlamp aim too low (1.8)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front coil spring broken (2.4.C.1a)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Offside Rear coil spring broken (2.4.C.1a)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Inner Front Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Offside Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Inner Front Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BF08 XDG is a 2008 Ford Ka in Blue with a 1,297cc petrol engine. This vehicle has been through 13 MOT tests with a personal pass rate of 53.8%.
Across all 2008 Ford Ka models, the average MOT pass rate is 71.0% with a typical mileage of 41,756 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BF08 XDG, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 18 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BF08 XDG?
You can check the full history of BF08 XDG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BF08 XDG registered?
BF08 XDG is a 2008 Ford Ka, first registered on 10 March 2008.
Is BF08 XDG safe to buy?
The MOT history for BF08 XDG shows 13 tests with a 53.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BF08 XDG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BF08 XDG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.