2010 Kia Rio

Front Headlamp has a product on the lens but not seriously reducing light output both (4.1.4 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Front Headlamp has a product on the lens but not seriously reducing light output both (4.1.4 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Coil spring corroded All 4 (5.3.1 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Macpherson strut corroded but not seriously weakened Both fronts (5.3.3 (b) (i))

Rear beam corroded

Suspension component mounting prescribed area is corroded but not considered excessive near side rear/off side rear (5.3.6 (a) (i))

Nearside Front Headlamp aim projected beam image is obviously incorrect bulb in wrong way and needs polishing (4.1.2 (c))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect needs polishing (4.1.2 (c))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Coil spring corroded All 4 (5.3.1 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Macpherson strut corroded but not seriously weakened Both fronts (5.3.3 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge very close to limit 1.65mm (5.2.3 (e))

Rear beam corroded

Suspension component mounting prescribed area is corroded but not considered excessive near side rear/off side rear (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge under 3mm and cut (5.2.3 (e))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement wishbone front bush (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge under 3mm (5.2.3 (e))

Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Hydraulic brake calliper leaking (1.1.16 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge on 1.6mm (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge under 3mm and cut (5.2.3 (e))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement wishbone front bush (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge under 3mm (5.2.3 (e))

Axle swivel pins and bushes swivel pin and/or bush slightly worn slight both (5.1.2 (b) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Coil spring corroded both (5.3.1 (b) (i))

Rear axle corroded

shields fitted restricting access

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Vehicles internal headlight adjuster altered to recheck lights ()

Front Vehicles internal headlight adjuster altered to recheck lights ()

Nearside Front Headlamp aim too high (1.8)

Offside Front Headlamp aim too high (1.8)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)