2012 Fiat Doblo

Horn poor

Rear suspension springs paint has started to peel off and springs starting to corrode.

front number plate cracking

slight lag on rear brake application

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Front possible backplate catching disc

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush insecure (5.1.2 (b) (ii)) DANGEROUS

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Front possible backplate catching disc

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

clutch pedal rubber missing

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front coil spring broken (2.4.C.1a)

Windscreen has damage to an area in excess of a 10mm circle within zone 'A' full screen smashed (8.3.1a)

Front Brakes imbalanced across an axle (3.7.B.5b)

Front registration plate delaminated but not likely to be misread (6.3.1d)

Front Brakes imbalanced across an axle (3.7.B.5b)

Offside Front Macpherson strut has excessive movement in the upper support bearing assembly (2.5.B.1b)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front registration plate delaminated but not likely to be misread (6.3.1d)

Nearside Front coil spring broken (2.4.C.1a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

combustion leak at injectors

Front registration plate delaminated but not likely to be misread (6.3.1d)

Nail in nearside rear tyre

Under-trays fitted obscuring some underside components

o/s/f tyre inner edge worn

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Nearside Headlamp aim too high (1.8)

Nearside Rear Axle has inadequate clearance with the bump stop (2.4.A.1a)

Offside Headlamp aim too high (1.8)

Offside Rear Axle has inadequate clearance with the bump stop (2.4.A.1a)

Front registration plate delaminated but not likely to be misread (6.3.1d)

Nail in nearside rear tyre

Nearside Rear Shock absorber has a slightly worn bush (2.7.4)

Offside Rear Shock absorber has a slightly worn bush (2.7.4)

Under-trays fitted obscuring some underside components

o/s/f tyre inner edge worn