2001 Fiat Punto

Nearside Seat belt anchorage prescribed area is excessively corroded inner sill (5.2.6)

Offside Seat belt anchorage prescribed area is excessively corroded inner sill (5.2.6)

Nearside Rear Nail in tyre deteriorated ()

Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt both front lower (2.4.G.2)

both rear coil springs corroded

n/s/f tyre worn on outer edge

underside corroded

Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Headlamp aim too low (1.8)

Nearside Rear Nail in tyre deteriorated ()

Offside Headlamp aim too low (1.8)

Oil leak ()

Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt both front lower (2.4.G.2)

both rear coil springs corroded

n/s/f tyre worn on outer edge

underside corroded

Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Parking brake: efficiency below requirements (3.7.B.7)

front brake application uneven (3.7.B.2)

Nearside Rear coil spring corroded (2.4.C.1b)

Nearside coil spring corroded (2.4.C.1b)

Offside Rear Vehicle structure has slight corrosion floor (6.1.A.1)

Offside Rear coil spring corroded (2.4.C.1b)

Nearside Steering rack gaiter deteriorated (2.2.D.2d)

Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Steering rack gaiter deteriorated (2.2.D.2d)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Steering rack gaiter deteriorated (2.2.D.2d)

Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Steering rack gaiter deteriorated (2.2.D.2d)

Headlamp aim beam image obviously incorrect (1.8.A.1b)

Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear coil spring corroded (2.4.C.1b)

o/s sill to floor corroded

Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear coil spring corroded (2.4.C.1b)

o/s sill to floor corroded

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

rear exhaust mountings soft

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear coil spring corroded (2.4.C.1b)

E.M.L. light on

Oil leak

Steering arm has relative movement at its fixings (2.2.B.1h)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

n/s/f wing mirror inscure

Front Steering arm has relative movement at its fixings (2.2.B.1h)

Exhaust has a minor leak of exhaust gases (7.1.2)

Front Steering pivot point has slight play (2.2.B.1g)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)