2003 Ford Ka

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

both outer sills corroded

front chassis corroded on both sides

nearside front floor corroded

nearside rear bodywork corroded around fuel filler neck

rear axle bushes slightly worn

slight movement in both front top mounts

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Rear Body has a sharp edge caused by corrosion (6.1.C.1)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Registration plate lamp not working (1.1.C.1d)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

n/s and o/s front chassis begining to corrode

n/s floor begining to corrode

spare tyre flat

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Driver's door cannot be opened from outside the vehicle (6.2.B.1b)

Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Nearside Headlamp has a product on the light source so that the light output is severely reduced (1.7.5a)

Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

rear tyres begining to wear unevenly

Offside Rear coil spring corroded (2.4.C.1b)

Nearside Front Headlamp aim too low (1.8)

Offside Front Headlamp aim too low (1.8)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

both front top suspension mounts have slight play

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

both front top suspension mounts have slight play

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Brake hose excessively damaged (3.6.B.4d)

Nearside Front Brake hose twisted (3.6.B.4c)

Offside Headlamp not working on dipped beam (1.7.5a)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)