2003 Peugeot 206

Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt both sides (5.3.4 (b) (ii))

Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sills both sides (5.3.6 (a) (i))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm side wall split (5.2.3 (e)) DANGEROUS

Offside Front Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Offside Front Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Parking brake inoperative on one side (1.4.1 (a))

Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

both front tyres worn on inner edges near side to limit

front brake discs corroded on inner face

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Headlamp not working on dipped beam (1.7.5a)

Rear registration plate deteriorated (6.3.1d)

Registration plate lamp not working (1.1.C.1d)

Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

both front tyres worn on inner edges near side to limit

front brake discs corroded on inner face

both front tyres worn on inner edges

front brake discs corroded

hole in exhaust back box

off side front shock absorber has light misting of oil

slight oil leak from engine

front brakes in poor condition

Engine covers fitted obscuring some components in the engine bay

Oil leak

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

exhaust corroded

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Rear Brake load sensing valve linkage seized (3.6.E.3)

Engine covers fitted obscuring some components in the engine bay

Offside Headlamp aim too high (1.8)

Oil leak

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

exhaust corroded

Engine covers fitted obscuring some components in the engine bay

Rear Brake load sensing valve linkage stiff (3.6.E.3)

lower engine cover not secure

water in o/s/r lamps

Nearside Front position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Rear Passenger's seat cannot be secured in the upright position. (6.2.A.2)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Engine covers fitted obscuring some components in the engine bay

Rear Brake load sensing valve linkage stiff (3.6.E.3)

lower engine cover not secure

water in o/s/r lamps

Front Brake pad(s) wearing thin (3.5.1g)

front brake discs slightly worn

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Registration plate lamp not working (1.1.C.1d)

Front Brake pad(s) wearing thin (3.5.1g)

front brake discs slightly worn

Rear Brake load sensing valve linkage seized (3.6.E.3)

Rear Exhaust system not adequately supported (7.1.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Brake load sensing valve linkage seized (3.6.E.3)

exhaust join middle and rear corroded

Nearside front brake binding (3.7.B.1)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Headlamp aim too high when the centre of the headlamp is below 850mm from the ground (1.6.B2)

Offside Headlamp aim too low when the centre of the headlamp is below 850mm from the ground (1.6.B2)