MOT Status
ExpiredMileage
122,293 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c))
Nearside Stop lamp(s) light intensity significantly reduced (4.3.3 (a) (ii))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
All direction indicators slightly discoloured (4.4.3 (a))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Suspension arm corroded but not seriously weakened Suspension axle (5.3.3 (b) (i))
Front Lower Suspension arm pin or bush worn but not resulting in excessive movement both side front lower arm rear bush (5.3.4 (a) (i))
Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Front Lower Suspension arm pin or bush worn but not resulting in excessive movement both side front lower arm rear bush (5.3.4 (a) (i))
Offside Side repeater lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii))
Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Tyre worn close to legal limit/worn on edge 155/80/13 (5.2.3 (e))
Offside Rear Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm/axle (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm/axle (5.3.4 (a) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Nearside Front Side repeater not working (4.4.1 (a) (ii))
Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Front Upper Macpherson strut mounting damaged and seriously weakened (5.3.3 (b) (i))
Rear Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Front Shock absorber has a light misting of oil (2.7.3)
Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)
Front Exhaust has a minor leak of exhaust gases clamp/joint (7.1.2)
Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Macpherson strut corroded but not seriously weakened (2.4.G.1)
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Macpherson strut corroded but not seriously weakened (2.4.G.1)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Oil leak
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Windscreen washer provides insufficient washer liquid (8.2.3)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Windscreen wiper blade insecure (8.2.2)
Offside Front Windscreen wiper blade insecure (8.2.2)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
How Reliable is the Fiat Panda?
Based on 1,821,354 MOT tests across 128,867 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BF54 XNE is a 2004 Fiat Panda in Blue with a 1,242cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 68%.
Across all 2004 Fiat Panda models, the average MOT pass rate is 71.5% with a typical mileage of 51,788 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Fiat Panda fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 66,636 recorded failures. If you're considering buying BF54 XNE, it's worth having these areas checked by a mechanic before committing.
The Fiat Panda typically stays on UK roads for around 22 years. At 22 years old, this Fiat Panda is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BF54 XNE?
You can check the full history of BF54 XNE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BF54 XNE registered?
BF54 XNE is a 2004 Fiat Panda, first registered on 15 September 2004.
Is BF54 XNE safe to buy?
The MOT history for BF54 XNE shows 25 tests with a 68% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BF54 XNE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BF54 XNE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.