2006 Fiat Panda

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside front and Offside front suspension turrets begging to corrode.

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Track rod end ball joint has slight play (2.1.3 (b) (i))

EML light on

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

EML light on

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Oil leak, but not excessive gear box leaking (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened heavily corroded (5.3.3 (b) (i))

rear exhaust silencer is heavily corroded

Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Front Suspension arm pin or bush excessively worn rearmost bush (5.3.4 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rearmost bush (5.3.4 (a) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Oil leak, but not excessive gear box leaking (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened heavily corroded (5.3.3 (b) (i))

rear exhaust silencer is heavily corroded

Front Coil spring corroded BOTH (5.3.1 (b) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Coil spring corroded BOTH (5.3.1 (b) (i))

rear silencer corroded

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge Worn on outer edge. (5.2.3 (e))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Rear Silencer corroded.

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

front tyres wearing on inner edges still legel

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear bush (2.4.G.2)

Nearside Rear Upper Shock absorber has an excessively worn bush (2.7.4)

Offside Front Shock absorber casing corroded externally so the unit does not function (2.7.2a)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear bush (2.4.G.2)

Offside Rear Upper Shock absorber has an excessively worn bush (2.7.4)

Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)

front tyres wearing on inner edges still legel

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

Rear exhaust corroded

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Fuel system component leaking (7.2.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)