2006 Mercedes-benz Cls

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Lower Suspension component ball joint has slight play (5.3.4 (a) (i))

Offside Play in steering rack inner joint(s)

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Aux belt deteriorated

Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))

Nearside Front Steering arm has slight play

Nearside Front Tyre slightly damaged (5.2.3 (d) (ii))

Offside Front Steering arm has slight play

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Minor stone chip to windscreen within zone "A" but not adversely affecting drivers view.

Offside Play in steering rack inner joint(s)

Rear Service brake fluctuating, but not excessively Both. (1.2.1 (e))

Rear Tyre worn close to legal limit/worn on edge Both down to 2mm. (5.2.3 (e))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

engine cover and undertray fitted

Parking brake efficiency below requirements (1.4.2 (a) (i))

engine cover and undertray fitted

engine cover and undertray fitted

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear Tyre worn close to legal limit/worn on edge on 2mm (5.2.3 (e))

engine cover and undertray fitted

Undertrays fitted

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Undertrays fitted

Nearside Front tyre worn heavily on inside edge but o k at test time (tracking fault ?)

Rear exhaust brace bar between two pipes snapped but system secure at test time

Offside Front Tyre has ply or cords exposed inner edge 245/40/18 (4.1.D.1b)

Offside Rear Tyre tread depth below requirements of 1.6mm 275/35/18 (4.1.E.1)

Nearside Front tyre worn heavily on inside edge but o k at test time (tracking fault ?)

Rear exhaust brace bar between two pipes snapped but system secure at test time

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

noise when rotating nearside rear wheel

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

noise when rotating nearside rear wheel

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Under-trays fitted obscuring some underside components

Engine covers fitted obscuring some components in the engine bay

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Under-trays fitted obscuring some underside components

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

both front tyres worn on inner edge