MOT Status
ExpiredMileage
80,358 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced middle (6.1.1 (c) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Corrosion around fuel filler
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Windscreen washer not working (3.5 (a))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Corrosion around fuel filler
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Outer Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Outer Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front coil spring broken (2.4.C.1a)
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Tyre worn close to the legal limit worn on outer edge of tread (4.1.E.1)
Nearside outer sill corroded
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush worn (2.4.G.2)
Offside outer sill corroded
Nearside Rear coil spring broken (2.4.C.1a)
Offside Rear coil spring broken (2.4.C.1a)
Nearside Front Tyre worn close to the legal limit worn on outer edge of tread (4.1.E.1)
Nearside outer sill corroded
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush worn (2.4.G.2)
Offside outer sill corroded
both outer sills have corrosion present
exhaust system corroded
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
exhaust systrm corroded
rear tyres on 4mm and outer sidewalls perishing
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
wipers smearing
Nearside Rear position lamp(s) not working (1.1.A.3b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
wipers smearing
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Headlamp not working on dipped beam (1.7.5a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BF56 YLP is a 2006 Ford Ka in Red with a 1,299cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 59.1%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BF56 YLP, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BF56 YLP?
You can check the full history of BF56 YLP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BF56 YLP registered?
BF56 YLP is a 2006 Ford Ka, first registered on 8 September 2006.
Is BF56 YLP safe to buy?
The MOT history for BF56 YLP shows 22 tests with a 59.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BF56 YLP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BF56 YLP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.