2008 Audi Q7

Offside Rear Child Seat fitted not allowing full inspection of adult belt ()

Rear Brake pad(s) wearing thin nearside - offside (1.1.13 (a) (ii))

Nearside Front Lower Suspension arm ball joint has slight play bottom ball joint (5.3.4 (a) (i))

Both steps corroded underneath

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Front Headlamp aim projected beam image is obviously incorrect both front headlamp kick up are incorrect. (4.1.2 (c))

Headlamp aim not tested (4.1.2 (b))

Nearside Front Suspension arm ball joint excessively worn lower ball joint excessive lift. (5.3.4 (a) (i))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt lower ball joint gaitor split. (5.3.4 (b) (ii))

Offside Rear Position lamp likely to become detached lower bumper light insecure in bumper. (4.2.1 (c) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps Both rear number plate lights inop. (4.7.1 (b) (ii))

Central Front Windscreen damaged but not adversely affecting driver's view stone chipped. (3.2 (a) (i))

Interior mirror is missing.

NSR handbrake performance is fluctuating

NSR/OSR lower bumper lights are full of condensation.

Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement forward mounting bush is perishing. (5.3.4 (a) (i))

Nearside Rear Suspension rod corroded but not seriously weakened lower tie rod heavily corroded. (5.3.3 (b) (i))

Nearside Rear lower wishbone excessively corroded at hub anchor point.

Offside Front Sub-frame pin or bush worn but not resulting in excessive movement forward mounting bush is perishing. (5.3.4 (a) (i))

Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement forward mounting bush is perishing. (5.3.4 (a) (i))

Offside Rear Suspension rod corroded but not seriously weakened lower tie rod heavily corroded. (5.3.3 (b) (i))

Side step mounting brackets are heavily corroded.

TPM light is ON!

Nearside Front Headlamp aim projected beam image is obviously incorrect NOT UK HEADLAMPS (4.1.2 (c))

Offside Front Headlamp aim projected beam image is obviously incorrect NOT UK HEADLAMPS (4.1.2 (c))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Driver's seat fore and aft adjustment mechanism not functioning as intended. (6.2.5 (b) (i))

Nearside Headlamp aim projected beam image is obviously incorrect kick up wrong direction (4.1.2 (c))

Nearside Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Headlamp aim projected beam image is obviously incorrect kick up wrong direction (4.1.2 (c))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Front Brake pad(s) wearing thin both sides (1.1.13 (a) (ii))

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Rear Tyre tread depth below requirements of 1.6mm both rear tyres (4.1.E.1)

Front registration plate character(s) likely to be misread (6.3.4b)

Parking brake: efficiency below requirements (3.7.C.1b)

Brake warning light on

Offside Rear Rear fog lamp not working (1.3.2b)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Front Headlamp aim too high (1.8)

Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Child seat fitted not allowing full inspection of adult belt