2012 Honda Cbr 125 R-c

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

one front position bulb not working

Horn not working (7.7 (a))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

one front position bulb not working

Exhaust noisy (8.1.1 (a))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Offside Riders footpeg pin cannot fall out but should be secured via a nut.

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Brake pad(s) close to minimum limit (1.1.13 (a))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Brake excessively binding (1.2.1 (f))

Rear Brake disc significantly and obviously worn disorted (1.1.14 (a) (i))

Rear Stop lamp not working (4.3.1 (a) (ii))

Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) DANGEROUS

Brake pad(s) close to minimum limit (1.1.13 (a))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Wheel alignment slightly misaligned (2.4 (a))

Chain guard missing ()

Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Footrest missing both rear footrests missing (6.2.12 (a))

Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Chain guard missing ()

Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

one front position bulb not working

Drive chain excessively tight (6.2.1d)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear reflector on motorcycle incorrectly positioned (1.4.2d)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Wheel alignment slightly misaligned. (2.5.1)

one front position bulb not working

Drive chain worn but not considered excessive (6.2.1e)

Front Drive chain sprocket slightly worn (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)

Drive chain worn but not considered excessive (6.2.1e)

Front Drive chain sprocket slightly worn (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear suspension fouling which affects the movement of the rear suspension (2.4.A.3a)