2013 Ford Transit

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

both outer sills corroded

Bonnet primary retaining device ineffective bonnet cannot be opened (3.1 (c))

Exhaust emissions exceed manufacturer's specified limit 0.53 (8.2.2.2 (a))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Nearside Rear Tyre tread depth below requirements of 1.6mm flat spot (5.2.3 (e)) DANGEROUS

Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Exhaust emissions exceed default limit of 0.7m-1 (8.2.2.2 (b))

Fuel cap/sealing device missing (6.1.3 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Upper Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Nearside Front Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e))

Offside Front Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Position lamp not working (4.2.1 (a) (ii))

coolant bottle empty

Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps nearside & offside (4.7.1 (b) (ii))

Stop lamp(s) non-obligatory stop lamp not working center (4.3.1 (a) (ii))

damp around rear hub seals

Nearside Rear Stop lamp not working (1.2.1b)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)