MOT Status
ExpiredMileage
90,148 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive floor (7.1.1 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front floor corrosion
slight corrosion to inner floor/sills
Suspension component mounting prescribed area is corroded but not considered excessive both inner sills and front floor (2.4.A.3)
Front Exhaust system not adequately supported rubber not attached (7.1.1)
Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Offside Rear rear parking brake recording little or no effort (3.7.B.6a)
Suspension component mounting prescribed area is corroded but not considered excessive both inner sills and front floor (2.4.A.3)
Nearside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Nearside Rear Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside front washer poor
Offside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Incorrect size wipers fitted
Exhaust system badly corroded
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
exhaust is coroded
Exhaust has part of the system slightly deteriorated (7.1.1a)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
offside rear handbrake weak
Front brake disc slightly pitted (3.5.1h)
Nearside Front brake disc slightly pitted (3.5.1h)
How Reliable is the Mazda 323?
Based on 823,541 MOT tests across 88,407 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BG02 JXM is a 2002 Mazda 323 in Green with a 1,324cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 88.2%.
Across all 2002 Mazda 323 models, the average MOT pass rate is 71.9% with a typical mileage of 63,872 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda 323 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 53,662 recorded failures. If you're considering buying BG02 JXM, it's worth having these areas checked by a mechanic before committing.
The Mazda 323 typically stays on UK roads for around 38 years. At 24 years old, this Mazda 323 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BG02 JXM?
You can check the full history of BG02 JXM by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BG02 JXM registered?
BG02 JXM is a 2002 Mazda 323, first registered on 24 April 2002.
Is BG02 JXM safe to buy?
The MOT history for BG02 JXM shows 17 tests with a 88.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BG02 JXM have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BG02 JXM. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.