MOT Status
ExpiredMileage
111,189 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
brake disc worn, pitted or scored, but not seriously weakened right hand rear (3.5.1i)
Front Headlamp aim beam image obviously incorrect both dip beams no pattern (1.8.A.1b)
brake disc worn, pitted or scored, but not seriously weakened right hand rear (3.5.1i)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Registration plate lamp not working (1.1.C.1d)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Exhaust noisy (7.1.4)
Nearside Headlamp aim too high (1.8)
Offside Headlamp aim too high (1.8)
advise both front 195-50-16 tyres worn on edge
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Headlamp aim too low (1.8)
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Rear Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Upper Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Upper Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Emissions not tested (7.0)
Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
exhaust condition
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Rear brake caliper has restricted free movement (3.5.1k)
Parking brake: efficiency below requirements (3.7.B.7)
Registration plate lamp not working (1.1.C.1d)
Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a) DANGEROUS
Offside Inner Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
n/s/rear tyre worn uneven
Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Rear Body has a sharp edge caused by damage (6.1.C.1)
Front brake disc slightly pitted (3.5.1h)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Mazda 323?
Based on 823,541 MOT tests across 88,407 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BG03 FZH is a 2003 Mazda 323 in Silver with a 1,991cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 55.6%.
Across all 2003 Mazda 323 models, the average MOT pass rate is 72.1% with a typical mileage of 57,526 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 323 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 53,662 recorded failures. If you're considering buying BG03 FZH, it's worth having these areas checked by a mechanic before committing.
The Mazda 323 typically stays on UK roads for around 38 years. At 23 years old, this Mazda 323 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BG03 FZH?
You can check the full history of BG03 FZH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BG03 FZH registered?
BG03 FZH is a 2003 Mazda 323, first registered on 31 March 2003.
Is BG03 FZH safe to buy?
The MOT history for BG03 FZH shows 18 tests with a 55.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BG03 FZH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BG03 FZH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.