MOT Status
ExpiredMileage
135,440 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Anti-roll bar linkage ball joint dust cover severely deteriorated both side (5.3.4 (b) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened both side (1.1.14 (a) (ii))
Front Tyre worn close to legal limit/worn on edge both side (5.2.3 (e))
Rear both wings corroded
surface corrosion under vehicle both seals front and rear chasse rails
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Registration plate lamp not working (1.1.C.1d)
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Nearside Front suspension has excessive movement at a wishbone pin or bush (2.5.A.1c)
Offside Front suspension has excessive movement at a wishbone pin or bush (2.5.A.1c)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Lower Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Upper Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Rear Lower Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Registration plate lamp not working (1.1.C.1d)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Offside front brake grabbing severely (3.7.A.2b)
Offside rear brake binding (3.7.B.1)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
rear brake application uneven (3.7.B.2)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc slightly pitted (3.5.1h)
Nearside Headlamp aim too high (1.8)
Rear Brake pad(s) wearing thin (3.5.1g)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc slightly pitted (3.5.1h)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda 323?
Based on 823,541 MOT tests across 88,407 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BG03 GBX is a 2003 Mazda 323 in Black with a 1,991cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 65%.
Across all 2003 Mazda 323 models, the average MOT pass rate is 72.1% with a typical mileage of 57,526 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 323 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 53,662 recorded failures. If you're considering buying BG03 GBX, it's worth having these areas checked by a mechanic before committing.
The Mazda 323 typically stays on UK roads for around 38 years. At 23 years old, this Mazda 323 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BG03 GBX?
You can check the full history of BG03 GBX by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BG03 GBX registered?
BG03 GBX is a 2003 Mazda 323, first registered on 31 March 2003.
Is BG03 GBX safe to buy?
The MOT history for BG03 GBX shows 20 tests with a 65% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BG03 GBX have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BG03 GBX. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.