2003 Peugeot 206

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords 175/65/14'' (5.2.3 (d) (i))

Nearside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords 175/65/14'' (5.2.3 (d) (i))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Suspension arm pin or bush worn but not resulting in excessive movement Both sides front arms rear bushed slight unbonding (5.3.4 (a) (i))

Tyre slightly damaged/cracking or perishing Both front tyres outer edges poor condition (5.2.3 (d) (ii))

Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bushes both sides (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge outer (5.2.3 (e))

Brake load sensing valve seized but ABS functioning (1.1.17 (c) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bushes both sides (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge outer (5.2.3 (e))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Seat belt anchorage prescribed area is fractured (5.2.6)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Service brake: efficiency below requirements (3.7.B.7)

Brake load sensing valve linkage stiff (3.6.E.3)

Front Brake pad(s) wearing thin (3.5.1g)

off side rear tyre is out of shape

Brake load sensing valve linkage seized (3.6.E.3)

Nearside Headlamp aim too low (1.8)