MOT Status
ExpiredMileage
99,987 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Nearside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Outer Tyre has a cut in excess of the requirements deep enough to reach the ply or cords Sidewall (4.1.D.1a)
Offside Registration plate lamp not working (1.1.C.1d)
Rear fog lamp not working (1.3.2b)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Tyre Worn On Inner Edge
Nearside Rear Valve stem slightly damaged (4.1.D.1e)
Offside Rear Valve stem slightly damaged (4.1.D.1e)
oil leak at engine traction control light on
slight exhaust blow at front o/s cv boot split
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Rear fog lamp not working (1.3.2b)
oil leak at engine traction control light on
slight exhaust blow at front o/s cv boot split
rear brake discs corroded rear brake pads low various metal brake pipes corroded
Rear fog lamp not working (1.3.2b)
rear brake discs corroded rear brake pads low various metal brake pipes corroded
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
rear brake discs corroded
rear brake discs corroded
Centre Exhaust system not adequately supported (7.1.1)
Centre Obligatory mirror insecure (8.1.1)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Rear Registration plate lamp not working (1.1.C.1d)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Oil leak
Rear Brake pad(s) wearing thin (3.5.1g)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
tracking out
washers need adjusting
Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Track rod end ball joint has slight play (2.2.B.1f)
both front tyres worn on inner edge
both rear tyres cracking in tread
Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Front position lamp(s) not working (1.1.A.3b)
Track rod end ball joint has slight play (2.2.B.1f)
both front tyres worn on inner edge
both rear tyres cracking in tread
Nearside Front Direction indicator slightly discoloured (1.4.A.2f)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Direction indicator slightly discoloured (1.4.A.2f)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
nearside front sidelight bulb dim
nearside front windscreen washer jet blocked/not working
Centre Rear Rear fog lamp not working (1.3.2b)
Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Rear Registration plate lamp not working (1.1.C.1d)
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Side repeater incorrect colour (1.4.A.2f)
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Side repeater incorrect colour (1.4.A.2f)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Alt belt squecking
Both front inner discs badly corroded
Exhaust centre and rear buffles braking up
O/S/F tyre catching on inner wing gard on full lock
Nearside Headlamp aim too high (1.8)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp aim too high (1.8)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Headlamp aim too low (1.8)
Offside Headlamp aim too low (1.8)
Nearside Front Headlamp not in good working order adversely affecting beam image (1.2.4a)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BG03 TUA is a 2003 Peugeot 206 in Silver with a 1,587cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 52.2%.
Across all 2003 Peugeot 206 models, the average MOT pass rate is 68.8% with a typical mileage of 62,409 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BG03 TUA, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 23 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BG03 TUA?
You can check the full history of BG03 TUA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BG03 TUA registered?
BG03 TUA is a 2003 Peugeot 206, first registered on 18 April 2003.
Is BG03 TUA safe to buy?
The MOT history for BG03 TUA shows 23 tests with a 52.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BG03 TUA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BG03 TUA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.