MOT Status
ExpiredMileage
123,898 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced In wheel arch area {marked yellow} (7.1.1 (a) (i))
Offside Front Service brake excessively binding (1.2.1 (f))
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced In wheel arch area {marked yellow} (7.1.1 (a) (i))
Headlamp has a product on the lens but not seriously reducing light output Both (4.1.4 (b))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material After flexi (1.1.11 (c))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bush separating (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Around trailing arm mount (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Floor area around lower arm, rear bush mount (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material After flexi (1.1.11 (c))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bush separating (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Around trailing arm mount (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement 'D' rubbers (5.3.4 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Anti-roll bar pin or bush worn but not resulting in excessive movement 'D' rubbers (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement 'D' rubbers (5.3.4 (a) (i))
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))
Front Anti-roll bar pin or bush worn but not resulting in excessive movement 'D' rubbers (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement 'D' rubbers (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
general corrosion to rear sub-frame and suspension
Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
general corrosion to rear sub-frame and suspension
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement 'D' rubbers (5.3.4 (a) (i))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement 'D' rubbers (5.3.4 (a) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))
Service brake efficiency below requirements (1.2.2 (a) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill (6.1.B.2)
Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Oil leak ()
Nearside rear brake binding (3.7.B.1)
Offside Front Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Oil leak ()
Front tyres close to wear limit.
Oil leak
Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear exhaust corroded
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Offside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear exhaust corroded.
Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Stop lamp not working (1.2.1b)
Rear exhaust corroded.
Rear exhaust corroded.
Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Rear exhaust corroded.
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Offside Rear fog lamp not working (1.3.2b)
How Reliable is the Subaru Legacy?
Based on 349,986 MOT tests across 31,204 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BG03 UWS is a 2003 Subaru Legacy in Silver with a 3,000cc petrol engine. This vehicle has been through 30 MOT tests with a personal pass rate of 63.3%.
Across all 2003 Subaru Legacy models, the average MOT pass rate is 72.2% with a typical mileage of 86,036 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Subaru Legacy fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 11,876 recorded failures. If you're considering buying BG03 UWS, it's worth having these areas checked by a mechanic before committing.
The Subaru Legacy typically stays on UK roads for around 35 years. At 23 years old, this Subaru Legacy is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BG03 UWS?
You can check the full history of BG03 UWS by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BG03 UWS registered?
BG03 UWS is a 2003 Subaru Legacy, first registered on 8 May 2003.
Is BG03 UWS safe to buy?
The MOT history for BG03 UWS shows 30 tests with a 63.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BG03 UWS have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BG03 UWS. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.