MOT Status
ExpiredMileage
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Front Headlamp has a product on the lens but not seriously reducing light output dull (4.1.4 (b))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced panel behind bumper (6.1.1 (c) (i))
Rear Shock absorbers has a reduced damping effect (5.3.2 (d))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Front Headlamp has a product on the lens but not seriously reducing light output dull (4.1.4 (b))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced panel behind bumper (6.1.1 (c) (i))
Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Rear Shock absorbers has a reduced damping effect (5.3.2 (d))
Front Service brake fluctuating, but not excessively (1.2.1 (e))
Front Service brake requirements only just met. It would appear that the braking system requires adjustment or repair Brake imbalance requirement only just met (1.2.1 (c))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Rear cross member corroded
Nearside Front Brake hose excessively deteriorated (1.1.12 (b) (ii))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Brake hose excessively deteriorated (1.1.12 (b) (ii))
Offside Front Brake prescribed area is excessively corroded under ABS pump (1.1.21 (e) (i))
Offside Rear Exhaust system insecure system fouling on driveshaft (6.1.2 (a))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Front Service brake fluctuating, but not excessively (1.2.1 (e))
Front Service brake requirements only just met. It would appear that the braking system requires adjustment or repair Brake imbalance requirement only just met (1.2.1 (c))
Nearside Front Inner inner sill corroded to excess no within the prescribed area
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Rear cross member corroded
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive . Engine (8.4.1 (a) (i))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive . Engine (8.4.1 (a) (i))
Oil leak ()
Front Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre sill/chassis (6.1.B.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre sill/chassis (6.1.B.2)
Offside Front Inner Tyre worn close to the legal limit edge (4.1.E.1)
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
windscreen damaged outside swept area
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)
Nearside Rear Rear position lamp(s) not working (1.1.A.3b)
Nearside Rear Side repeater incorrect colour (1.4.A.2f)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Registration plate lamp not working both lamps (1.1.C.1d)
Stop lamp remains on when the brakes are released (1.2.1e)
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Headlamp has a product on the light source but not seriously reducing light output (1.7.5a)
rear cross member corroded outside prescribed area
windscreen damaged outside swept area
Nearside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)
Vehicle rusty in places but not in prescribed areas
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Rear Brake pad(s) wearing thin (3.5.1g)
nearside washer pipe split & leaking
park brake lot of travel foot brake travel advise inspection
Offside Rear coil spring incomplete (2.4.C.1a)
Offside Registration plate lamp not working (1.1.C.1d)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Rear Brake pad(s) wearing thin (3.5.1g)
nearside washer pipe split & leaking
park brake lot of travel foot brake travel advise inspection
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Headlamp not working on main beam (1.7.5a)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
oil leak rear diff
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
oil leak rear diff
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BG04 HVB is a 2004 Mercedes-benz Vito in White with a 2,148cc diesel engine. This vehicle has been through 22 MOT tests with a personal pass rate of 68.2%.
Across all 2004 Mercedes-benz Vito models, the average MOT pass rate is 67.7% with a typical mileage of 109,326 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying BG04 HVB, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 22 years old, this Mercedes-benz Vito is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BG04 HVB?
You can check the full history of BG04 HVB by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BG04 HVB registered?
BG04 HVB is a 2004 Mercedes-benz Vito, first registered on 22 April 2004.
Is BG04 HVB safe to buy?
The MOT history for BG04 HVB shows 22 tests with a 68.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BG04 HVB have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BG04 HVB. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.