2005 Honda Xr 125 L-4

Front Brake binding but not excessively (1.2.1 (f))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Wheel alignment slightly misaligned (2.4 (a))

Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) DANGEROUS

Front Brake binding but not excessively (1.2.1 (f))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Wheel alignment slightly misaligned (2.4 (a))

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake binding but not excessively (1.2.1 (f))

Wheel alignment slightly misaligned (2.4 (a))

Horn not working (7.7 (a))

Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) DANGEROUS

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake binding but not excessively (1.2.1 (f))

Wheel alignment slightly misaligned (2.4 (a))

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Horn not working (7.7 (a))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))

Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b))

Dipswitch does not operate immediately when selected on main beam (4.1.3 (b))

Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Front Brake excessively binding (1.2.1 (f))

Headlamp aim not tested (4.1.2 (b))

Horn not working (7.7 (a) (ii))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Front Brake fluid below minimum mark (1.1.10 (d) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Clutch cable freyd

Rear Shock absorber has a slightly worn bush Bottom (5.3.2 (c))

Steering headbearing has slight free play (2.2.2 (f) (i))

Front Wheel has a slightly eccentric bead rim. (4.2.2)

Headlight poor illumination

Rear mono-shock pivot worn but not excessive (2.4.B.4)

Steering headbearing has slight free play (2.2.2)

Wheel alignment slightly misaligned. (2.5.1)

Front Floor brake test indicates a binding brake (3.3.C2c)

Horn control not functioning. (1.7.2b)

Front Wheel has a slightly eccentric bead rim. (4.2.2)

Headlight poor illumination

Rear mono-shock pivot worn but not excessive (2.4.B.4)

Steering headbearing has slight free play (2.2.2)

Wheel alignment slightly misaligned. (2.5.1)

Drive chain worn but not considered excessive (6.2.1e)

Front Tyre worn close to the legal limit (4.1.3(ii))

Headlamp damaged but function not impaired Lens (1.2.3a)

Rear Drive chain sprocket slightly worn (6.2.1e)

Drive chain worn but not considered excessive (6.2.1e)

Front Tyre worn close to the legal limit (4.1.3(ii))

Headlamp damaged but function not impaired Lens (1.2.3a)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Floor brake test indicates a binding brake (3.3.C2c)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front suspension assembly slightly misaligned (2.3.1)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

exhaust corroded

front brake binding slightly

rear light damaged

Headlamp aim too low (1.6)

Headlamp insecure (1.2.3b)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front suspension assembly slightly misaligned (2.3.1)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

exhaust corroded

front brake binding slightly

rear light damaged

Rear wheel bearings have slight free play (2.4.A.2c)

Rear Tyre worn close to the legal limit (4.1.3(ii))