MOT Status
ExpiredMileage
128,104 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside front wing lower part corroded not likely to cause injury
Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))
Offside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside front wing lower part corroded not likely to cause injury
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Tyre obviously driven flat
Nearside Front Windscreen wiper blade defective (3.4 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Drive shaft securing bolt missing (6.1.7 (a) (i))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Tyre obviously driven flat
Nearside Front Windscreen wiper blade defective (3.4 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside and nearside front lower wings corroded outside of prescribed area
Rear suspension has surface corrosion
Headlamp levelling device inoperative (4.1.5 (a))
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Road wheel badly distorted (5.2.2 (c) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside and nearside front lower wings corroded outside of prescribed area
Rear suspension has surface corrosion
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Offside and nearside front wings corroded outside of prescribed area
Rear suspension has surface corrosion
Headlamp levelling device inoperative (4.1.5 (a))
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Offside and nearside front wings corroded outside of prescribed area
Rear suspension has surface corrosion
Front Power steering component has slight seepage from a component pinion housing (2.1.5 (a))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm front bush (5.3.4 (a) (i))
Offside Front Road wheel slightly distorted (5.2.2 (c) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Front Power steering component has slight seepage from a component pinion housing (2.1.5 (a))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm front bush (5.3.4 (a) (i))
Offside Front Road wheel slightly distorted (5.2.2 (c) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake disc worn, pitted or scored, but not seriously weakened Corroded. (1.1.14 (a) (ii))
Rear Tyre slightly damaged/cracking or perishing Both sides perished/worn inner edge. (5.2.3 (d) (ii))
Rear suspension components corroded.
Headlamp aim projected beam image is obviously incorrect Both sides. (4.1.2 (c))
Headlamp levelling device inoperative Both sides. (4.1.5 (a))
Rear fog lamp not working (4.5.1 (a) (ii))
Coolant level below minimum.
Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake disc worn, pitted or scored, but not seriously weakened Corroded. (1.1.14 (a) (ii))
Rear Tyre slightly damaged/cracking or perishing Both sides perished/worn inner edge. (5.2.3 (d) (ii))
Rear suspension components corroded.
Offside Front wing corroded at the bottom
coolant low
Nearside Front Road wheel fixing missing (5.2.1 (a) (i))
Nearside Rear Road wheel fixing missing (5.2.1 (a) (i))
Offside Front Road wheel fixing missing (5.2.1 (a) (i))
Offside Rear Road wheel fixing missing (5.2.1 (a) (i))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front wing corroded at the bottom
coolant low
Nearside Headlamp lens seriously defective (4.1.1 (b) (ii))
Offside Headlamp lens seriously defective (4.1.1 (b) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Rear fog lamp tell-tale not working (4.9.1 (a) (ii))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Front Headlamp has a product on the lens but not seriously reducing light output both sides (1.7.5a)
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Nearside Front Suspension arm rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Offside Front Suspension arm rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Front Headlamp has a product on the lens but not seriously reducing light output both sides (1.7.5a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Engine covers fitted obscuring some components in the engine bay
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Under-trays fitted obscuring some underside components
both headlamps poor images
front brakes slightly out of balance
o/s/f tyre wearing on inner edge
Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Engine covers fitted obscuring some components in the engine bay
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Under-trays fitted obscuring some underside components
both headlamps poor images
front brakes slightly out of balance
o/s/f tyre wearing on inner edge
Engine covers fitted obscuring some components in the engine bay
Offside Headlamp aim too low (1.8)
Under-trays fitted obscuring some underside components
Engine covers fitted obscuring some components in the engine bay
Under-trays fitted obscuring some underside components
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
front breake discs worn
offside front tyre worn on inner edge
offside rear tyre cut in tread
offside rear tyre worn on inner edge
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Headlamp aim too high (1.8)
Rear Brake pad(s) wearing thin (3.5.1g)
front brake discs worn
handbrake low effort
Front Brake pad(s) wearing thin (3.5.1g)
Rear Brake pad(s) wearing thin (3.5.1g)
front brake discs worn
handbrake low effort
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Ford Focus C-max?
Based on 1,326,487 MOT tests across 79,932 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BG05 UJD is a 2005 Ford Focus C-max in Silver with a 1,997cc diesel engine. This vehicle has been through 30 MOT tests with a personal pass rate of 56.7%.
Across all 2005 Ford Focus C-max models, the average MOT pass rate is 73.0% with a typical mileage of 73,496 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Focus C-max fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 67,238 recorded failures. If you're considering buying BG05 UJD, it's worth having these areas checked by a mechanic before committing.
The Ford Focus C-max typically stays on UK roads for around 23 years. At 21 years old, this Ford Focus C-max is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BG05 UJD?
You can check the full history of BG05 UJD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BG05 UJD registered?
BG05 UJD is a 2005 Ford Focus C-max, first registered on 11 May 2005.
Is BG05 UJD safe to buy?
The MOT history for BG05 UJD shows 30 tests with a 56.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BG05 UJD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BG05 UJD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.