2007 Volvo C30

Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b))

Nearside Front Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS

Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS

Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material to rear (1.1.11 (c))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Brake pedal anti-slip provision missing (1.1.2 (c))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Front Headlamp light intensity severely reduced (4.1.4 (a))

Rear Exhaust system insecure bracket (6.1.2 (a))

Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Brake pedal anti-slip provision missing (1.1.2 (c))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Rear Exhaust system insecure hanger broken (6.1.2 (a))

Brake fluid close to minimum mark (1.1.10 (d) (ii))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

slight damage to windscreen but out of drivers view

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

slight damage to windscreen but out of drivers view

Nearside Door mirror cover missing

Nearside Front Tyre wearing smooth on both edges (205/50 17)

Nearside Headlamp light output slightly reduced

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Door mirror cover missing

Offside Rear Child Seat fitted not allowing full inspection of adult belt ()

Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Door mirror cover missing

Nearside Front Tyre wearing smooth on both edges (205/50 17)

Nearside Headlamp light output slightly reduced

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Door mirror cover missing

Offside Rear Child Seat fitted not allowing full inspection of adult belt ()

engine covers fitted

under trays fitted

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement and o/s/f rear bushes cracking , rear brake discs worn (2.4.G.2)

Brake pad(s) wearing thin (3.5.1g)

cut on tyre side wall n/s/f not down to cords

front brake pads 1/2 worn

Offside Headlamp not working on dipped beam (1.7.5a)