2007 Subaru Forester

Brake performance unable to be tested due to corrosion to rear top mount areas (1.2.1 (g))

Engine MIL inoperative or indicates a malfunction illuminated (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength holed and heavy corrosion (5.3.6 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Upper Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength holed and heavy corrosion (5.3.6 (a) (i))

Nearside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Play in steering rack inner joint(s) ()

Nearside Rear Anti-roll bar attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Anti-roll bar attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Exhaust has a minor leak of exhaust gases silencer (6.1.2 (a))

Vehicles internal headlight adjuster altered to recheck lights ()

outer sill covers fitted

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Anti-roll bar attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Rear Anti-roll bar attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Front Exhaust has a major leak of exhaust gases joint (6.1.2 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch hole (5.3.6 (a) (i))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Anti-roll bar attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Rear Anti-roll bar attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Exhaust has a minor leak of exhaust gases joint (6.1.2 (a))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement "D" bushes Both sides. (5.3.4 (a) (i))

Front Exhaust has a minor leak of exhaust gases Pipe. (6.1.2 (a))

Offside Rear Tyre slightly damaged/cracking or perishing Perishing. (5.2.3 (d) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement "D" bushes Both sides. (5.3.4 (a) (i))

Front Exhaust has a minor leak of exhaust gases Pipe. (6.1.2 (a))

Offside Rear Tyre slightly damaged/cracking or perishing Perishing. (5.2.3 (d) (ii))

Central Exhaust has a minor leak of exhaust gases Joint. (6.1.2 (a))

General under body corrosion.

Nearside Play in steering rack inner joint(s) ()

Offside Rear Tyre slightly damaged/cracking or perishing Perishing. (5.2.3 (d) (ii))

Central Exhaust has a minor leak of exhaust gases Joint. (6.1.2 (a))

Rear Tyre slightly damaged/cracking or perishing Perishing Both sides. (5.2.3 (d) (ii))

Central Exhaust has a minor leak of exhaust gases Joint. (6.1.2 (a))

Sill covers fitted.

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Sill covers fitted.

Nearside Headlamp aim too high (1.8)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high (1.8)