2007 Ford Ka

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Subframe mounting prescribed area is corroded but not considered excessive n/s and o/s (5.3.6 (a) (i))

Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive n/s and o/s (5.3.6 (a) (i))

some of under body covered with under sealant

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i))

Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting behind spring (6.2.2 (d) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i))

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Nearside Rear Tyre slightly damaged/cracking or perishing 2x nails (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front tyre is bald on the inner edge

Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Rear Exhaust silencer insecure (8.1.1 (b) (i))

Nearside Front tyre is bald on the inner edge

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front coil spring broken (2.4.C.1a)

Nearside Headlamp aim too low (1.8)

Nearside Stop lamp not working (1.2.1b)

Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

front brake discs wearing and corrosion present

both front brake discs have slight deterioration

both rear of the front wishbone arm bushes have some deterioration

n/s/r upper shockabsorber rubber mounting has slight wear

windscreen has slight damage inside zone A

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

both front brake discs have slight deterioration

both rear of the front wishbone arm bushes have some deterioration

n/s/r upper shockabsorber rubber mounting has slight wear

windscreen has slight damage inside zone A

Nearside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Headlamp aim too high and too far to the right. (1.8)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Headlamp aim too high and too far to the right. (1.8)

Offside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)