2009 Fiat Panda

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Direction indicator slightly discoloured n/s & o/s (4.4.3 (a))

Rear Brake hose has slight corrosion to ferrule n/s & o/s (1.1.12 (f) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Front Direction indicator slightly discoloured n/s & o/s (4.4.3 (a))

Rear Brake hose has slight corrosion to ferrule n/s & o/s (1.1.12 (f) (i))

Windscreen wiper blade defective n/s & o/s (3.4 (b) (i))

Front Direction indicator slightly discoloured n/s & o/s (4.4.3 (a))

Rear Brake hose has slight corrosion to ferrule n/s & o/s (1.1.12 (f) (i))

Emissions unable to be completed due to exhaust leak (8.2.1.2 (d))

Front Exhaust has a major leak of exhaust gases flexi (6.1.2 (a))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Front Direction indicator slightly discoloured n/s & o/s (4.4.3 (a))

Rear Brake hose has slight corrosion to ferrule n/s & o/s (1.1.12 (f) (i))

rear silencer hitting bumper

Central Exhaust system insecure (6.1.2 (a))

Rear Coil spring corroded so that its cross sectional area is reduced and seriously weakened both (5.3.1 (b) (i))

Offside Front Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Rear Coil spring corroded both (5.3.1 (b) (i))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Rear Coil spring corroded both (5.3.1 (b) (i))

Nearside Rear and offside rear coroding

Rear exhaust box deteriorating

Nearside Front Suspension arm pin or bush excessively worn and offside front (5.3.4 (a) (i))

Nearside Rear Tyre tread depth below requirements of 1.6mm and offside rear (5.2.3 (e)) DANGEROUS

Nearside Rear and offside rear coroding

Rear exhaust box deteriorating

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Coil spring corroded (5.3.1 (b) (i))

Engine covers/Under trays fitted

Backbox corroded

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Rear coil spring corroded (2.4.C.1b)

Backbox corroded

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Offside Inner Front Tyre worn close to the legal limit (4.1.E.1)

Rear coil spring corroded (2.4.C.1b)

Backbox corroded

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Offside Inner Front Tyre worn close to the legal limit (4.1.E.1)

Rear Registration plate lamp not working (1.1.C.1d)

Rear coil spring corroded (2.4.C.1b)

Backbox corroded

Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Rear coil spring corroded (2.4.C.1b)

Child seat fitted not allowing full inspection of adult belt

Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Items removed from driver's view prior to test

Rear fog lamp not working (1.3.2b)

backbox corroded

Child seat fitted not allowing full inspection of adult belt

Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Items removed from driver's view prior to test

backbox corroded

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Items removed from driver's view prior to test

both front antiroll bar links play in bottom ball joints almost to failing point

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)