MOT Status
ExpiredMileage
163,024 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Nearside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
underbody heavily undersealed
Rear brake back plates showing corrosion
Rear chassis showing corrosion
Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))
Rear brake back plates showing corrosion
Rear chassis showing corrosion
Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))
Coil spring corroded all (5.3.1 (b) (i))
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
corrosion to chassis,inner and outer sills
diff mount worn
headlights deteriorating
Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))
Coil spring corroded all (5.3.1 (b) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
corrosion to chassis,inner and outer sills
diff mount worn
headlights deteriorating
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside front inner cv boot has small spilt
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear chassis legs corroded
Small chip in windscreen
Underside of vehicle corroded
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Nearside Rear Service brake excessively fluctuating (1.2.1 (e))
Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Registration plate lamp inoperative in the case of a single lamp or all lamps both (4.7.1 (b) (ii))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
corrosion inner sills
corrosion to underbody off vehicle
rear diff support bushes poor
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
front lower suspension arms corroded and bushes perrished
general underside corrosion noted
Nearside Front Brake pipe excessively corroded pipes into splitter valve (3.6.B.2c)
Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
front lower suspension arms corroded and bushes perrished
general underside corrosion noted
headlights faded
headlights faded
corrosion noted around rear suspension mounting areas
headlights faded
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
corrosion noted around rear suspension mounting areas
headlights faded
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
front lower suspension arms corroded
general corrosion noted to underside of vehicle
sill covers fitted
Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g) DANGEROUS
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
front lower suspension arms corroded
front tyres worn on inner edges
general corrosion noted to underside of vehicle
n/s/r tyre perrished 205/70/15
sill covers fitted
Nearside Front suspension has slight deterioration of the bonding between metal and flexible material of an upper support bearing (2.5.B.3a)
Offside Front suspension has slight deterioration of the bonding between metal and flexible material of an upper support bearing (2.5.B.3a)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Front suspension has slight deterioration of the bonding between metal and flexible material of an upper support bearing (2.5.B.3a)
Offside Front suspension has slight deterioration of the bonding between metal and flexible material of an upper support bearing (2.5.B.3a)
brake discs corroded
headlights slightly deteriorated
rear tyres slightly perished
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front registration plate deteriorated (6.3.1d)
Nearside Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Rear registration plate deteriorated (6.3.1d)
brake discs corroded
headlights slightly deteriorated
rear tyres slightly perished
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Stop lamp not working (1.2.1b)
Nearside Rear brake disc slightly pitted (3.5.1h)
Offside Rear brake disc slightly pitted (3.5.1h)
Nail in offside rear tyre
How Reliable is the Honda Cr-v?
Based on 4,177,643 MOT tests across 304,403 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BG53 SXR is a 2003 Honda Cr-v in Silver with a 1,998cc petrol engine. This vehicle has been through 32 MOT tests with a personal pass rate of 59.4%.
Across all 2003 Honda Cr-v models, the average MOT pass rate is 73.1% with a typical mileage of 90,218 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Honda Cr-v fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 62,925 recorded failures. If you're considering buying BG53 SXR, it's worth having these areas checked by a mechanic before committing.
The Honda Cr-v typically stays on UK roads for around 29 years. At 23 years old, this Honda Cr-v is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BG53 SXR?
You can check the full history of BG53 SXR by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BG53 SXR registered?
BG53 SXR is a 2003 Honda Cr-v, first registered on 23 October 2003.
Is BG53 SXR safe to buy?
The MOT history for BG53 SXR shows 32 tests with a 59.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BG53 SXR have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BG53 SXR. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.