MOT Status
ExpiredMileage
127,412 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust mounting defective center mounting detatched (6.1.2 (a))
Nearside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced main chassis rail (6.1.1 (c) (i))
Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Vehicle structure is corroded but structural rigidity is not significantly reduced main chassis rail (6.1.1 (c) (i))
Oil leak, but not excessive gearbox leaking from nearside driveshaft seal (8.4.1 (a) (i))
Steering system slightly rough (2.1.1 (a))
offside and nearside inner door shuts corroding
power steering fluid low
tow bar rusty
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Headlamp aim too low (4.1.2 (a))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i))
Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))
Exhaust mounting defective center mounting detatched (6.1.2 (a))
Nearside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced main chassis rail (6.1.1 (c) (i))
Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Vehicle structure is corroded but structural rigidity is not significantly reduced main chassis rail (6.1.1 (c) (i))
Oil leak, but not excessive gearbox leaking from nearside driveshaft seal (8.4.1 (a) (i))
Steering system slightly rough (2.1.1 (a))
offside and nearside inner door shuts corroding
power steering fluid low
tow bar rusty
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Windscreen wiper blade defective (3.4 (b) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Windscreen wiper blade defective (3.4 (b) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced cross member (6.1.1 (c) (i))
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Windscreen wiper blade defective (3.4 (b) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Windscreen wiper blade defective (3.4 (b) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced cross member (6.1.1 (c) (i))
Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Brake fluid significantly below minimum mark (1.1.10 (d) (ii))
Nearside Front Brake pipe excessively corroded (1.1.11 (c))
Nearside Headlamp aim not tested (4.1.2 (b))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced CHASSI (6.1.1 (c) (i))
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting INNER SILL (6.2.2 (d) (i))
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting INNER SILL (6.2.2 (d) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Central Rear Brake pipe excessively corroded x2 (1.1.11 (c))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Brake fluid warning lamp illuminated (1.1.10 (f))
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Nearside Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a) DANGEROUS
Nearside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Rear coil spring corroded (2.4.C.1b)
front and rear chassis and suspension componants have heavy surface corrosion
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Offside Rear coil spring corroded (2.4.C.1b)
front and rear chassis and suspension components have heavy surface corrosion
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Registration plate lamp not working (1.1.C.1d)
Front Brake pad(s) wearing thin (3.5.1g)
Windscreen washer provides insufficient washer liquid (8.2.3)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Kia Sorento?
Based on 738,544 MOT tests across 54,549 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BG55 PFF is a 2005 Kia Sorento in Silver with a 2,497cc diesel engine. This vehicle has been through 26 MOT tests with a personal pass rate of 65.4%.
Across all 2005 Kia Sorento models, the average MOT pass rate is 70.9% with a typical mileage of 80,895 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Kia Sorento fails its MOT is brake pipe excessively corroded, accounting for 12,793 recorded failures. If you're considering buying BG55 PFF, it's worth having these areas checked by a mechanic before committing.
The Kia Sorento typically stays on UK roads for around 23 years. At 21 years old, this Kia Sorento is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BG55 PFF?
You can check the full history of BG55 PFF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BG55 PFF registered?
BG55 PFF is a 2005 Kia Sorento, first registered on 1 November 2005.
Is BG55 PFF safe to buy?
The MOT history for BG55 PFF shows 26 tests with a 65.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BG55 PFF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BG55 PFF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.