2012 Ford Mondeo

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear heatshield insecure but not likely to become detached

Subframe mounting prescribed area is corroded but not considered excessive Front and rear (5.3.6 (a) (i))

Brake performance unable to be tested binding brake (1.2.1 (g))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Front Tyre has ply or cords exposed cut in outer sidewall (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Suspension arm insecure and impairing directional stability front arm marked in yellow, fixing also insecure (5.3.3 (a) (ii)) DANGEROUS

Brake fluid close to minimum mark (1.1.10 (d) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front noise detected when spinning wheel, cannot pinpoint exact location

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear heatshield insecure but not likely to become detached

Subframe mounting prescribed area is corroded but not considered excessive Front and rear (5.3.6 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Nearside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

plastic sill covers fitted not allowing full inspection of some underside components

Offside Rear Brake cable insecure (1.1.15 (c))

Offside Rear Tyre tread depth below requirements of 1.6mm bald inner edge (5.2.3 (e)) DANGEROUS

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Nearside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

plastic sill covers fitted not allowing full inspection of some underside components

Central Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Rear Suspension arm pin or bush excessively worn trailing arm bush (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush excessively worn trailing arm bush (5.3.4 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Central Front Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Inner Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement bonding braking away (5.3.4 (a) (i))

Nearside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Rear Exhaust system insecure (6.1.2 (a))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement bonding braking away (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Exhaust has a minor leak of exhaust gases clamp (6.1.2 (a))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bonding braking away (5.3.4 (a) (i))

Rear Exhaust mounting defective broken away (6.1.2 (a))

Offside Rear Suspension arm pin or bush excessively worn trailing arm (5.3.4 (a) (i))

Front Headlamp cleaning device for LED or HID headlamp inoperative both no water (4.1.6 (a) (ii))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Exhaust has a minor leak of exhaust gases clamp (6.1.2 (a))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bonding braking away (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Exhaust mounting defective broken away (6.1.2 (a))

Front brake disc in such a condition that it is seriously weakened + back (3.5.1i)

Nearside Tyre tread depth below requirements of 1.6mm both (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)