MOT Status
ExpiredMileage
114,352 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Items removed from driver's view prior to test
Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Oil leak
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)
Windscreen washer provides insufficient washer liquid (8.2.3)
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Items removed from driver's view prior to test
Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Oil leak
Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Oil leak
Brake load sensing valve seized (3.6.E.3)
Brakes imbalanced across an axle (3.7.B.5b)
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)
Offside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)
rear brake application uneven (3.7.B.2)
Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Oil leak
Nearside Front Lower Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Side repeater incorrect colour (1.4.A.2f)
Offside Side repeater incorrect colour (1.4.A.2f)
Nearside Front Lower Suspension arm severely distorted (2.4.G.1)
Nearside Headlamp aim not tested (1.8.A.1c)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Rear position lamp(s) not working (1.1.A.3b)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Stop lamp not working (1.2.1b)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Brake hose twisted (3.6.B.4c)
Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front wheel bearing rough when rotated (2.5.A.2)
Offside Headlamp aim too low (1.8)
Offside Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Front Road wheel bead rim badly distorted (4.2.A.1a) DANGEROUS
Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS
Nearside Rear Braking system leaking (3.6.A.1) DANGEROUS
Offside Rear Braking system leaking (3.6.A.1) DANGEROUS
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Service brake: efficiency below requirements (3.7.B.7) DANGEROUS
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)
Rear Brake load sensing valve linkage seized (3.6.E.3)
Rear Exhaust has part of the system excessively deteriorated (7.1.1a)
Rear Exhaust system not adequately supported (7.1.1)
Suspension joint offside lower dust cover split/missing
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BJ02 FWT is a 2002 Peugeot 206 in Silver with a 1,360cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 66.7%.
Across all 2002 Peugeot 206 models, the average MOT pass rate is 67.0% with a typical mileage of 65,592 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BJ02 FWT, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 24 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BJ02 FWT?
You can check the full history of BJ02 FWT by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BJ02 FWT registered?
BJ02 FWT is a 2002 Peugeot 206, first registered on 26 April 2002.
Is BJ02 FWT safe to buy?
The MOT history for BJ02 FWT shows 15 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BJ02 FWT have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BJ02 FWT. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.