MOT Status
ExpiredMileage
79,525 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Brake pipe corroded, covered in grease or other material TO FRONT X2 (1.1.11 (c))
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Horn not working (1.6.2a)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear bush (2.4.G.2)
Offside Front drive shaft coupling flexible rubber or fabric coupling insecure inner (2.5.C.1e)
Offside Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Stop lamp not working (1.2.1b)
Nearside Front Suspension arm has slight play in a pin/bush bush torn (2.4.G.2)
Nearside Rear Brake pipe slightly corroded to front (3.6.B.2c)
Offside Rear Brake pipe slightly corroded to front (3.6.B.2c)
Brake load sensing valve seized (3.6.E.3)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Brake pipe excessively corroded to compensator (3.6.B.2c)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Rear rear brake recording little or no effort (3.7.B.5a)
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Brake pipe excessively corroded to compensator (3.6.B.2c)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Suspension arm has slight play in a pin/bush bush torn (2.4.G.2)
Nearside Rear Brake pipe slightly corroded to front (3.6.B.2c)
Offside Rear Brake pipe slightly corroded to front (3.6.B.2c)
Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BJ02 KLV is a 2002 Peugeot 206 in Black with a 1,360cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 78.9%.
Across all 2002 Peugeot 206 models, the average MOT pass rate is 67.0% with a typical mileage of 65,592 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BJ02 KLV, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 24 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BJ02 KLV?
You can check the full history of BJ02 KLV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BJ02 KLV registered?
BJ02 KLV is a 2002 Peugeot 206, first registered on 29 June 2002.
Is BJ02 KLV safe to buy?
The MOT history for BJ02 KLV shows 19 tests with a 78.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BJ02 KLV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BJ02 KLV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.