MOT Status
ExpiredMileage
129,043 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Suspension rod ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Central Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c))
Offside Side repeater incorrect colour (4.4.3 (a))
Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS
Offside Front Suspension rod ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Offside Rear tyre wearing unevenly + perishing.
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Suspension component ball joint excessively worn (5.3.4 (a) (i))
Offside Rear tyre wearing unevenly + perishing.
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive bulkhead (1.1.21 (e) (i))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Outer sill area soft
Offside Front tyre getting low on tread and wearing on inner edge
Oil leak, but not excessive (8.4.1 (a) (i))
fuel tank strap corroded
underside of vehicle dirty making test difficult
Nearside Rear tyre stepping on inner edges.
Rear wiper arm broken
slight damage to zone B on screen
SERIOUS OIL LEAK FROM OIL FILTER!
Offside Inner Track rod end ball joint has slight play (2.2.B.1f)
Brake load sensing valve linkage seized (3.6.E.3)
Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside Inner Track rod end ball joint has slight play (2.2.B.1f)
Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
condensation o/s/r light
Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Emissions not tested (7.0)
Nearside Registration plate lamp not working (1.1.C.1d)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
rear exhaust box rusty
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Nearside Inner Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Inner Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Rear position lamp(s) excessively damaged so that it is not visible from a reasonable distance (1.1.A.3d)
Nearside Rear Stop lamp excessively damaged so that it is not visible from a reasonable distance (1.2.1d)
Nearside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Nearside Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BJ02 LSL is a 2002 Peugeot 206 in Silver with a 1,124cc petrol engine. This vehicle has been through 27 MOT tests with a personal pass rate of 63%.
Across all 2002 Peugeot 206 models, the average MOT pass rate is 67.0% with a typical mileage of 65,592 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BJ02 LSL, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 24 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BJ02 LSL?
You can check the full history of BJ02 LSL by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BJ02 LSL registered?
BJ02 LSL is a 2002 Peugeot 206, first registered on 26 June 2002.
Is BJ02 LSL safe to buy?
The MOT history for BJ02 LSL shows 27 tests with a 63% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BJ02 LSL have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BJ02 LSL. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.