MOT Status
ExpiredMileage
104,850 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Centre Front Lower Leaf spring has a slightly deteriorated anchor pin rubber bush not resulting in excessive movement (2.4.B.2)
OIL LEAK.
Offside Front Direction indicator slightly discoloured (1.4.A.2f)
Offside Front Tie bar/rod has slight play in a ball joint (2.4.G.2)
accelerator pedal rubber missing.
Nearside Body has a sharp edge caused by damage (6.1.C.1)
Nearside Front Headlamp aim too low (1.8)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Rear Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)
Rear Brake pipe excessively corroded (3.6.B.2c)
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)
Centre Front Lower Leaf spring has a slightly deteriorated anchor pin rubber bush not resulting in excessive movement (2.4.B.2)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
OIL LEAK.
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Direction indicator slightly discoloured (1.4.A.2f)
Offside Front Tie bar/rod has slight play in a ball joint (2.4.G.2)
Offside Rear Registration plate lamp not working (1.1.C.1d)
accelerator pedal rubber missing.
Centre Rear Brake pipe slightly corroded (3.6.B.2c)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Rear wheel bearing rough when rotated (2.6.1)
Centre Rear Brake pipe slightly corroded (3.6.B.2c)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Seat belt insecurely fixed to the vehicles structure (5.2.1a)
Offside Rear Seat belt insecurely fixed to the vehicles structure (5.2.1a)
Registration plate lamp insecure (1.1.C.1c)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Headlamp aim beam image obviously incorrect (1.8.A.1b)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Registration plate lamp not working (1.1.C.1d)
Centre Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Offside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Offside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Oil leak
Nearside Rear Rear position lamp(s) not working (1.1.A.3b)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Track rod end ball joint has excessive play (2.2.B.1f)
Exhaust has a minor leak of exhaust gases (7.1.2)
Oil leak
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
Offside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nail in offside front tyre
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Brake load sensing valve linkage seized (3.6.E.3)
Nearside Front Road wheel bead rim badly distorted (4.2.A.1a)
Nearside Registration plate lamp not working (1.1.5c)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BJ02 UWH is a 2002 Peugeot 206 in Silver with a 1,124cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 57.9%.
Across all 2002 Peugeot 206 models, the average MOT pass rate is 67.0% with a typical mileage of 65,592 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BJ02 UWH, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 24 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BJ02 UWH?
You can check the full history of BJ02 UWH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BJ02 UWH registered?
BJ02 UWH is a 2002 Peugeot 206, first registered on 27 June 2002.
Is BJ02 UWH safe to buy?
The MOT history for BJ02 UWH shows 19 tests with a 57.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BJ02 UWH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BJ02 UWH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.