MOT Status
ExpiredMileage
137,131 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust has a minor leak of exhaust gases (7.1.2)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear tyre wall cracking
Brake pipe excessively corroded front to rear (3.6.B.2c)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp insecure (1.7.3)
Nearside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)
Nearside Stop lamp not working (1.2.1b)
Offside Headlamp not working on dipped beam (1.7.5a)
Rear fog lamp not working (1.3.2b)
Exhaust has a minor leak of exhaust gases (7.1.2)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear tyre wall cracking
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nail in offside front tyre
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Oil leak
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Exhaust system not adequately supported (7.1.1)
Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Stop lamp not working (1.2.1b)
Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nail in offside front tyre
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Oil leak
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
eng.man.light on
Front Brake pad(s) wearing thin (3.5.1g)
eng.man.light on
eng.man.light on
Registration plate lamp not working (1.1.C.1d)
eng.man.light on
Exhaust has a minor leak of exhaust gases (7.1.2)
Brake performance not tested (3.7.A.1)
Emissions not tested (7.0)
Exhaust has a major leak of exhaust gases (7.1.2)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension arm has slight play in a pin/bearing (2.4.G.2)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Front Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (7.1.4)
Front Windscreen has a combination of minor damage areas which restrict the drivers view (8.3.1c)
Front Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)
Front Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)
Front Windscreen wiper blade insecure (8.2.2)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Headlamp aim too high (1.8)
Offside Front Headlamp not in good working order adversely affecting beam image (1.2.4a)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension arm has slight play in a pin/bearing (2.4.G.2)
Front Indicator switch faulty (1.4.A.1)
Offside Front Headlamp excessively damaged so that the light output is severely reduced (1.7.5a)
Position lamp switch faulty (1.1.A.1)
Rear Registration plate lamp not working (1.1.C.1d)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Front Brake pad(s) wearing thin (3.5.1g)
Exhaust has a major leak of exhaust gases (7.1.2)
INDICATOR SWITCH WORN
Nearside Headlamp not working on dipped beam (1.7.5a)
INDICATOR SWITCH WORN
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BJ02 ZPY is a 2002 Peugeot 206 in Red with a 1,124cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 63.2%.
Across all 2002 Peugeot 206 models, the average MOT pass rate is 67.0% with a typical mileage of 65,592 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BJ02 ZPY, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 24 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BJ02 ZPY?
You can check the full history of BJ02 ZPY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BJ02 ZPY registered?
BJ02 ZPY is a 2002 Peugeot 206, first registered on 26 April 2002.
Is BJ02 ZPY safe to buy?
The MOT history for BJ02 ZPY shows 19 tests with a 63.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BJ02 ZPY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BJ02 ZPY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.