2003 Motor Hispania RX50

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Front Upper Suspension component pin or bush excessively worn (5.3.4 (a) (i))

Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) DANGEROUS

Rear Tyre tread not clearly visible (5.2.3 (e)) DANGEROUS

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Rear sprocket bolt broken

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Direction indicators not working (1.5.1c)

Front Tyre tread not clearly visible (4.1.3(i))

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Horn not working (1.7.3a)

Rear Direction indicators not working (1.5.1c)

Rear Roller brake test indicates a sticking brake (3.3.A1a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Upper Fuel system component leaking (7.2.1a)

Rear Drive chain slightly loose (6.2.1d)

Rear Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Headlamp aim too high (1.6)

Front Headlamp aim too high and too far to the left. (1.6)

Front Headlamp insecure (1.2.3b)

Rear Rear reflector on motorcycle obscured (1.4.1)

Front shock absorber has light misting of stanchion (2.3.3)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Brake performance not tested (3.3)

Front shock absorber seal failed and leaking oil (2.3.3)

Rear reflector on motorcycle obscured (1.4.1)

Rear suspension movement is excessively stiff (2.4.A.3b)

Roller brake test Neither brake control achieves an efficiency of 25% (3.3.A2b)

Roller brake test No brake control achieves an efficiency of 30%. (3.3.A2a)

Front Brake lever has inadequate reserve travel (3.1.3b) DANGEROUS