2003 Mazda MX-5

Rear rear exhaust bracket rusty

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Front Lower Suspension arm ball joint dust cover severely deteriorated both (5.3.4 (b) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear rear exhaust clamp bracket rusty

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail above roll bar mount (5.3.6 (a) (i))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Rear Brake pipe excessively corroded across axle (1.1.11 (c))

Front Suspension component mounting prescribed area is corroded but not considered excessive both front chassis rail (5.3.6 (a) (i))

Rear Suspension arm corroded but not seriously weakened both rear upper and lower (5.3.3 (b) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive both floor to sill (7.1.1 (a) (i))

rear exhaust joint corroded

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive arch (5.3.6 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS (5.3.6 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Nail in tyre ()

Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced SILL (7.1.1 (a) (i))

Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced SILL (7.1.1 (a) (i))

Both outer sills rusty

Front tyres cracking

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Rear Coil spring corroded both (5.3.1 (b) (i))

both floor to sills corroded

both rear inner sill ends corroded

front chassis rails corroded

front under tray insecure

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Rear Coil spring corroded both (5.3.1 (b) (i))

both floor to sills corroded

both rear inner sill ends corroded

front chassis rails corroded

front under tray insecure

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Suspension component mounting prescribed area is excessively corroded OUTER SILL (2.4.A.3)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Suspension component mounting prescribed area is excessively corroded OUTER SILL (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing (2.4.A.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

both rear outer sills corroded

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing (2.4.A.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

both rear outer sills corroded

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

N/S/F Tyre worn on outer edge/ just with in requirement

Rear brake pads wearing low