MOT Status
ExpiredMileage
97,404 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Exhaust emissions likely to be affected by an induction leak (8.2.1.1 (b))
Exhaust emits excessive dense blue smoke during acceleration (8.2.1.2 (g))
Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Front Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Front Position lamp not working Nearside and Offside (4.2.1 (a) (ii))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Brake disc worn, pitted or scored, but not seriously weakened Nearside and Offside (1.1.14 (a) (ii))
Front Headlamp has a product on the lens but not seriously reducing light output Nearside and Offside (4.1.4 (b))
Front Headlamp lens slightly defective Nearside and Offside (4.1.1 (b) (i))
Front Oil leak, but not excessive (8.4.1 (a) (i))
General surface rust on suspension and chassis
Nearside Rear Nail in tyre ()
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake disc worn, pitted or scored, but not seriously weakened Nearside and Offside (1.1.14 (a) (ii))
Undertray not fully secure (8.1.1 (b) (i))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
general surface rust on suspension and chassis
Front Tyre tread depth below requirements of 1.6mm offside and nearside (5.2.3 (e)) DANGEROUS
Front Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
general surface rust on suspension and chassis
Suspension arm corroded but not seriously weakened nearside and offside rear (5.3.3 (b) (i))
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
nearside headlamp on lower limit
plastic outter sill covers fitted
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp not working on dipped beam (1.7.5a)
Nearside Headlamp not working on main beam (1.7.5a)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
nearside headlamp on lower limit
plastic outter sill covers fitted
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Headlamp aim too high (1.8)
Nearside Headlamp excessively damaged so that the light output is severely reduced (1.7.5a) DANGEROUS
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front constant velocity joint is insecure (2.5.C.1b)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Rear brake disc excessively scored (3.5.1h)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Front wheel bearing has excessive play (2.5.A.3c)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Upper Suspension arm has slight play in a pin/bush (2.4.G.2)
How Reliable is the Toyota Avensis?
Based on 3,497,866 MOT tests across 274,257 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BJ04 CNC is a 2004 Toyota Avensis in Red with a 1,794cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 59.1%.
Across all 2004 Toyota Avensis models, the average MOT pass rate is 74.6% with a typical mileage of 86,468 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Avensis fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 106,316 recorded failures. If you're considering buying BJ04 CNC, it's worth having these areas checked by a mechanic before committing.
The Toyota Avensis typically stays on UK roads for around 28 years. At 22 years old, this Toyota Avensis is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BJ04 CNC?
You can check the full history of BJ04 CNC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BJ04 CNC registered?
BJ04 CNC is a 2004 Toyota Avensis, first registered on 22 March 2004.
Is BJ04 CNC safe to buy?
The MOT history for BJ04 CNC shows 22 tests with a 59.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BJ04 CNC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BJ04 CNC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.