2006 Peugeot 107

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn both (5.1.2 (b) (i))

Rear Coil spring corroded Nearside and Offside (5.3.1 (b) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill and inner wheel arch (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Axle mount area (5.3.6 (a) (i))

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn both (5.1.2 (b) (i))

Rear Coil spring corroded Nearside and Offside (5.3.1 (b) (i))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill and axle mount area (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill and axle mount area (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill holed within 30cm of suspension (6.1.1 (c) (i))

Offside Rear Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS

Front Brake disc worn, but not excessively inner braking surface (1.1.14 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced axle mount area (6.1.1 (c) (i))

Nearside Rear brake slightly binding

Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security axle mount area (6.2.2 (d) (i))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Hazard warning switch inoperative (4.4.2 (a) (ii))

Hazard warning switch inoperative (4.4.2 (a) (ii))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Front Brake disc worn, but not excessively inner braking surface (1.1.14 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced axle mount area (6.1.1 (c) (i))

Nearside Rear brake slightly binding

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security axle mount area (6.2.2 (d) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Nearside Rear Brake pipe excessively corroded front too rear (3.6.B.2c)

Nearside rear brake binding (3.7.B.1)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Brake pipe excessively corroded front too rear (3.6.B.2c)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

front brake excessively fluctuating (3.7.B.3)

rear brake application uneven (3.7.B.2)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)