MOT Status
ValidMileage
145,134 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Vehicle structure is corroded but structural rigidity is not significantly reduced All under vehicle (6.1.1 (c) (i))
Nearside Front Shock absorbers has negligible damping effect (5.3.2 (d))
Nearside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength closing panel 2hr (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength closing panel 2hrs (5.3.6 (a) (i))
Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure 205/55/16 worn out on edge (5.2.3 (d) (ii)) DANGEROUS
Offside Rear Tyre has a tear, caused by separation or partial failure of its structure worn out on edge (5.2.3 (d) (ii)) DANGEROUS
Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge worn out on edge on 2mm (5.2.3 (e))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge worn out on edge (5.2.3 (e))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
unable to check boot seats or seat belts
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge inner edge worn (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge both edges worn (5.2.3 (e))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge inner edge worn (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Horn not working (7.7 (a))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge inner edge worn (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge both edges worn (5.2.3 (e))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge inner edge worn (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bush (5.3.4 (a) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bush (5.3.4 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake pad(s) wearing thin (3.5.1g)
Rear Brake pad(s) wearing thin (3.5.1g)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
rear exhaust heat shield insecure
Nearside Registration plate lamp not working (1.1.C.1d)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Windscreen wiper does not clear the windscreen effectively both sides (8.2.2)
rear exhaust heat shield insecure
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)
Fuel system component leaking (7.2.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Side repeater not working (1.4.A.2c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
airbag warning light staying on
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
How Reliable is the Ford S-max?
Based on 1,368,227 MOT tests across 101,843 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BJ07 URR is a 2007 Ford S-max in Grey with a 1,753cc diesel engine. This vehicle has been through 24 MOT tests with a personal pass rate of 66.7%.
Across all 2007 Ford S-max models, the average MOT pass rate is 71.5% with a typical mileage of 94,502 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford S-max fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 26,089 recorded failures. If you're considering buying BJ07 URR, it's worth having these areas checked by a mechanic before committing.
The Ford S-max typically stays on UK roads for around 20 years. At 19 years old, this Ford S-max is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BJ07 URR?
You can check the full history of BJ07 URR by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BJ07 URR registered?
BJ07 URR is a 2007 Ford S-max, first registered on 25 April 2007.
Is BJ07 URR safe to buy?
The MOT history for BJ07 URR shows 24 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BJ07 URR have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BJ07 URR. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.